Login
Unsere Webseite verwendet Cookies, um die Bedienung zu erleichtern. x
  • Login
  • Register
20 Years Stahlwerk

AC/DC TIG welding machine devices with pulse function ARC-Stick

Zoom

AC/DC TIG 200 ST IGBT Pulse

Item #: 1023
Ideal for welding aluminium and thin metal sheets
- direct current- and alternating current TIG welding,
- The thin sheet + ALU suitable,
- MMA/ARC-Stick- electrode welding
Please select a variant

/statt 499,00 €

* incl. tax and free shipping to Germany *
Item is in stock
More Information under Terms of Delivery
AC / DC TIG welding devices are suitable for welding almost all materials (steel, stainless steel including aluminum).

Adjustable functions and important device elements:

AC/DC WIG welding – direct current- and alternating current.
Welding of almost all materials (also aluminium).
TIG (tungsten-inert gas welding) – Welding process with many advantages: easy handling, good controllability of the arc, narrow weld zone, splash-free arc, clean weld seam ……
IGBT Technology for all our ST models we rely on the powerful IGBT transistors, which are used in the power engineering of our ST devices. The advantages are high blocking voltage and robustness.
HF Ignition – high-frequency ignition (HF) by TIG - TIG High Frequency.
Non contact ignition. Reproducible welding results by HF ignition and constant welding parameters at start-up.
Startstrom Gas pre-flow protects the tungsten electrode from excessive wear and protects the weld seam for oxidation.
Startstrom Gas post-flow protects the tungsten electrode from excessive wear and protects the weld seam for oxidation.
With the switch 2T/4T the operating modes oft he control can be determined. This mode provides extended control over the current flow.
Down slope prevents piping (end craters) at the end of the weld. After the button on the burner has been released, the machine switches to an automatic current lowering phase. Downslope works only in 4T mode.
Startstrom MMA/ARC-Stick Electrode welding can be used under almost all conditions and therefore MMA welding can be described as a universal process in the welding industry.
Anti-Stick-function prevents sticking of the stick electrode.
In the case of a sticking of the electrode to the workpiece, the welding current is switched off.
ARC Force – with spray arc, also called ARC Force. This allows to regulate the arc range.
Hotstart – automatic voltage increase at start-up for better welding results.
Startstrom High Performance Cooling through two high-speed fans.
Fast cooling fan allows maximum power consumption and increases the operating time (ED) of the unit.
Startstrom Overheating -Control (O.C. - Overheating Control).
Overheat protection starts as soon as the unit is overloaded. A yellow indicator light turns on and goes out as soon as the unit has cooled down again.
The single-phase alternating current is to be protected in the household with a 16 A fuse.
The welding machine is connected directly to the single-phase alternating current (AC) 230 V (+ -15%), 50/60 Hz operation.
Startstrom ST-Housing is ergonomic, robust and operationally reliable:
- Sturdy sheet steel housing, - Shock-proof,
- Control panel conveniently accessible and easier to operate, - Intelligent fan guide.


Excellent quality due to fully digital inverter technology

The welding machine AC/DC TIG 200 ST has the most advanced inverter technology IGBT (Insulated Gate Bipolar Transistor). The resultant special features such as high speed and precision of the control give the devices their excellent quality in welding and cutting.


Note: This device can NOT be operated with a foot pedal!



Checklist TIG

In order to start welding you need the following things in addition to the welding machine:
- gas bottle argon 4.6
- pressure regulator (available in our shop)
- connection tube with clamps
- tungsten electrodes 1,6mm or 2,4mm (available in our shop)
- TIG wear parts: collet, collet body, gas nozzle, back cap (available in our shop)
- weldingrods for MMA / ARC (available in our shop)
- welding helmet (available in our shop)
- protective clothing: gloves, arm splash protection, gowns, safety shoes (available in our shop)
- welding rods for TIG: i.e. aluminum, steel, stainless steel

Furthermore, we recommend the following equipment:
- holder for welding torch (available in our shop)
- magnetic welders corner (available in our shop)
- TIG wear parts set (available in our shop)


Maintenance of the cutting current source

Caution: To ensure proper functioning of the appliance, the appliance must be cleaned at regular intervals with the compressed air from the accumulated metal dust. The Mettal dust can cause short circuits, which could lead to the guarantee being voided.

 

Professional machine for daily use
AC DC TIG with pulse function and MMA / ARC-Stick welding

Power
- TIG / MMA adjustable between 10 – 200 A

AC DC welding machine
For non-alloyed and low alloy steels, stainless steel, copper, brass etc.
As well as for light metals for example aluminum.

Gas cooled
Hose package gas – air cooled.

The long-lasting design and the demanding welding properties of the machines ensure a reliable daily use for the production welding work.

ST-housing

ST-Guard housing robust and reliable:
- Shock-proof
- Robust steel-sheet housing
- Hard plastic casing protects against damage
- High ED (duty cycle) by intelligent fan control
- Intelligent housing design with optimized airflow

Ease of use
- Modern housing shape
- The control panel is clear and ergonomic at the front
- All settings are comfortable, accessible and easier to operate
- Comfortable setting of the welding parameters via function selection and control dial
- Ergonomically arranged operating elements allow for high-quality welding processes and lead to an optimal working results

Safety – degree of protection by enclosure IP21:
- Protection against foreign material. Protected against solid foreign material with a diameter of 12,5 mm or more
- Protection against touch: Protected against access with a finger
- Protection against water: Protection against dripping water

Inverter welding machine
The welding inverter is an electronic welding current source. Inverter welding machines are built for all arc welding processes such as electrode, MIG/MAG, plasma and TIG welding. Depending on the power, the devices are connected one or three phases to the electric circuit.

The control technology fits different
Applications and greatly improves the welding performance

AC DC
AC alternating current (german: Wechselstrom).
- For light metal, for example aluminum and so on.
- Used for break-up of the oxide film from the surface of aluminum and the filler metal DC direct current.

DC direct current (german: Gleichstrom).
- For non-alloyed and low alloy steels, stainless steel, copper, brass and so on.

Bedienfeld

TIG (tungsten inert gas) is one of most important welding
for processing of high-alloy steel and all non-ferrous metals

HF high-frequency ignition
High frequency arc ignition (HF) at TIG.
A High frequency removal advance the sparking distance between the electrode and the workpiece. There is no direct contact between the tungsten electrode and the workpiece. The tungsten electrode does not touch the work piece – so the tungsten will be prevented and the weld is not exposed any tungsten attack. Touchless ignition works in different work configurations with high reliability.

Gas pre-flow
Adjustable between 0 – 2 seconds. Protects the tungsten electrode from excessive wear and protects the weld from oxidation.

Gas post flow
Adjustable between 1 – 10 seconds. Protects the tungsten electrode from excessive wear and protects the weld from oxidation.
Important to protect the welding seam from aeration and to create a gas atmosphere.

2T / 4T
In the 2 stroke mode, the button of the TIG hose pack must remain pressed. When the button is released, the arc goes out. At 4 stroke mode, after pressing and releasing the button of the TIG hose pack, the arc remains stable. The arc is extinguished only by pressing the torch again.

Note: In the 4T mode, the set welding current is not displayed until the display is activated.

That device has the feature "Current reduction" which can only be used in 4T mode.

Slope down (Current reduction)
The current reduction prevented end crater at the end of the weld. After the button is released, the machine switches to an automatic current reduction phase. During this phase, the current is lowered from the set value for welding current into the closing current. The duration of this phase is adjustable from 0 to 6 seconds. Down Slope can only be set by 4 stroke mode (4 T).

AC-TIG pulse width (control of arc cleaning)
Adjustable from “-5” to “+5”. With it you can influence the penetration and the breaking of the oxide layer. Choose - area for deeper penetration of the oxide layer. Choose + area for a better breaking up of it.


All our TIG welding machines are also suitable for MMA / E-hand welding.

Anti-stick
Shortly before the end, the system releases the set maximum current, which prevents sticking and annealing of the electrode. In the case of a sticking of the electrode to the workpiece, the welding current is switched off. The electrode does not glow and can easily be detached from the workpiece.

ARC force
With spray arc, also called ARC force, can be regulated the arc width.

Hotstart
Prevents the sticking of the stick electrode by short-term superimposition of the set welding current and warms up the weld seam start faster.


Overheat protection
Overheat protection goes on when the unit is overloaded. A yellow indicator light turns on and goes out as soon as the unit has cooled down again.

Output current TIG

10-200 A

Output current MMA

10-200 A

Duty cycle TIG

60% bei 200 A

Duty cycle MMA / ARC

60 % at 200 A

No-load voltage

60 V

Degree of protection by enclosure

IP21S

Insulation class

F

Mains voltage

230 V AC (+-15%) / 1 ~ (single phase)

Power frequency

50/60 Hz

Mains fuse (delay fuse)

1 x 16 A

Maximum input current

28 A

Maximum connection power

7,5 kVA~

Recommended generator power

> 6,1 kVA / 1 ~

Weight

11,2 kg

Dimensions Length x Width x Height (mm)

430 x 210 x 380

Mains supply

SchuKo-Type CEE 7/7

Norm

IEC 60 974-1 ; CE


  • The machine STAHLWERK AC/DC TIG 200 ST IGBT PULSE.
  • TIG Torch Package "WP-26" 4,5 meters*.
    TIG accessories 8-part (installed them each one piece already in the hose package):
    - 3 × gas nozzles in size 5, 6, 7.
    - 1 × adapter sleeves 1,6.
    - 1 × collet body 1,6.
    - 1 × long back cap.
    - 1 × short back cap.
    - 1 × universal tungsten electrode.

    * Pre-assembled accessory from the figure of the welding torch is part of the 8-piece set.

    Earth cable 3 meters.
    Cable with electrode holder 3 meters.

    Scope of delivery for optionally selectable items. To order, please select the appropriate options:

  • 1) Option "Consumables":
  • - TIG Wear Parts Set 36 Pieces. (Article details)
  • 2) Option "Holder":
  • - Holder for Welding Torch with Magnet Pedestal. (Article details)
  • 3) Option "Welding helmet":
  • - STAHLWERK ST-400M. (Article details)
  • 4) Option "Magnetic angles":
  • - 4 x small. (Article details)

    Information for orders of machines with accessories:
    Depending on the ordered accessories, we will ship a second package with UPS. This is free for you. We want to avoid transport damage. Although both packages leave our house at the same time, in some cases, the machine comes first and the accessories are delivered one day later. This is not the rule, but it happens.

    AGETARE Werbeagentur Bonn
    * incl. tax and free shipping to Germany *