MIG MAG 135 ST IGBT welder with synergic wire feed and real 135 amps

https://img.youtube.com/vi/epUfRz9k2IM/default.jpg

https://img.youtube.com/vi/oIMit3uDGjs/default.jpg

MIG MAG 135 ST IGBT welder with synergic wire feed and real 135 amps

SKU: 1790-001
GTIN: 4260294087903
Category: MIG MAG 135

STAHLWERK MIG MAG 135 ST IGBT - MIG MAG inert gas inverter welder with 135 Ampere, suitable for Flux Cored Wire, with MMA ARC Stick, white, 7 years warranty

199,99 €

incl. 19% VAT , plus

Available immediately
Delivery time: 13 - 15 Workdays (Other countries)

Available from: 06.04.2023 (Pre-orders possible)

You can purchase a maximum of Units 3 of this item.

Device Funktions & Components

MIG/MAG – Metal arc gas welding with direct current (DC). You can weld with inactive / inert (MIG, e.g., argon) or active (MAG, e.g., CO₂) gases. Gas and welding wire come from a torch head and allow the work to be carried out with just one hand.
Synergic wire feed: The welding current controls the wire feed speed entirely in accordance with the welding current.
2 in 1 combined device – MIG/MAG & MMA welding with up to 135 A.
IGBT Technology – latest transistor technology enables highest power and a duty cycle at full power. No transformer, no MOSFET, modern IGBT.
Lightweight & compact design – only 11,6 kg and dimensions of 450 x 240 x 370 mm. Innovative IGBT transistors save space and weight compared to the old MOSFET technology. No heavy carrying!

Device Features & Benefits

Highest efficiency & performance – Single phase current (230 V) supplies the device and allows an output power of real 135 amperes.
Smart cooling & overheating protection – modern technology, built-in overheat protection and high-performance cooling allow you to get maximum performance.
Flux cored wire– all our ST-Series devices can be used with flux cored wire. This allows welding without protective gas.
Automatic wire feed– the wire feed speed is automatically controlled by the set welding current.
Inductance – infinitely adjustable chocke, which smooths the welding current and improves the welding quality and ignition properties.

Voltage – Variable voltage control to manually adjust the burn-in and burn-off of the wire, so the different properties of different materials can be taken into account.
Manual wire thrust – no loss of gas or tedious push-through of the wire any more. If a new wire roll is to be fed through the hose package, this is done conveniently from the unit with the red wire feed button when the hose package is laid out.
Wire spool – commonly available 1 kg to 5 kg wire rolls can be processed here. The spool can accommodate 16mm and 50 mm spools.
Wire drive reel – different wire thicknesses can be used by simply changing the drive roller from 0.6mm & 0.8mm & 1.0mm.
MMA / Stick electrode welding– is a universal welding process. No protective gas is needed.
Note: The unit is not intended for use in residential areas where power is supplied by a public low-voltage power supply system. It may be difficult to ensure electromagnetic compatibility in these areas due to both conducted and radiated interference.

Technische Daten

Output current MIG / MMA	40-135 A
Protection class	IP21S
Mains voltage	230 V AC (+-15%) / 1 ~ (single-phase)
Mains frequency	50/60 Hz
Maximum mains current (I_1max) MIG/MAG / MMA	20.9 A / 25.6 A
Largest effective mains current (I_1eff) MIG/MAG / MMA	6.6 A / 8.1 A
Weight	11.6 kg
Dimensions L x W x H (mm)	450 x 240 x 370
Mains connection	CEE 7/7 Schuko plug
Standards	IEC 60974-1; EN 60974-10 (Class A)

Lieferumfang

The welding device STAHLWERK MIG MAG 135 ST
Professional MIG hose package "AK-15"/ 3 meter hose package with euro central connection
MIG accessory set 3-pieces (already pre - assembled on the MIG/MAG torch):
- 1 × gas nozzle
- 1 × gas nozzle carrier
- 1 × contact tip
Ground cable 3 meters
Electrode holder 3 meter
Weld wire feed roll 0.6mm & 0.8mm (the roll for 0.8mm & 1.0mm is already built in the device)
Chipping hammer
Wire brush
Gas hose with snap-on quick coupling 5 meters

Note: The units of the latest generation may contain details that differ from the product images shown here. In the new design, the STAHLWERK lettering and the reference to the IGBT technology are omitted, as this is now installed as standard. We will update the pictures as soon as possible.

Note for our United Kingdom customers:
Please note that import duties and United Kingdom Import VAT apply to goods valued at £135 or more. Customs will only release the delivery once the customs duties have been paid.
Therefore, please note the delivery status by checking the tracking number.

High-quality professional AK-15 MIG / MAG hose package with euro central connection for high compatibility. Optimal welding and ignition behavior up to 200 A. Thick hose, ergonomic handle and robust wear parts. A 3-part set of consumables for immediate start is included in delivery.

Robust electrode holder with modern 9 mm connection and 25 mm² cable cross-section. Best conductivity through high quality copper cables. Different angles for stick electrodes possible.