STAHLWERK CTM-250 ST Combi welding machine fully equipped TIG + MIG/MAG + MMA/ARC + CUT/Plasma with 200 amp and 45 amp plasma function

https://img.youtube.com/vi/wl2CPGKM0Ik/default.jpg

https://img.youtube.com/vi/WDGwmZXBXeI/default.jpg

https://img.youtube.com/vi/NqUbXBb8KSM/default.jpg

STAHLWERK CTM-250 ST Combi welding machine fully equipped TIG + MIG/MAG + MMA/ARC + CUT/Plasma with 200 amp and 45 amp plasma function

SKU: 1231
GTIN: 4260294082311
HAN: 1231
Category: Multi-process welding machines

The STAHLWERK CTM-250 ST is a versatile 4-in-1 combination welding machine with integrated CUT plasma cutting function. It combines TIG, MIG/MAG, MMA/ARC welding and plasma cutting in a compact 200 A inverter and therefore covers the most important processes for workshops, assembly and ambitious DIY enthusiasts. Numerous welding and cutting parameters can be set individually so that you can adapt the device precisely to the material, sheet thickness and work task.In MIG/MAG and FLUX mode, the CTM-250 ST processes solid and cored wire in the standard diameters of 0.6 to 1.0 mm (plus 0.9 mm for cored wire) - ideal for processing mild steel, stainless steel and cored wire applications. In DC TIG mode, the inverter enables clean, low-spatter seams on unalloyed and high-alloy steels, stainless steel, copper or brass, supported by adjustable parameters such as gas advance, gas delay, current increase/decrease and pulse function. Functions such as hot start and anti-stick facilitate ignition and prevent the electrode from sticking. Thanks to VRD voltage reduction, overheating protection, smart cooling and a robust ST-Guard housing, the device is reliable and safe even in demanding applications. A powerful 4-roller drive ensures reliable wire feed, which also transports thicker welding wires continuously and safely during MIG MAG welding. The integrated 45 A plasma cutter works with compressed air and achieves cutting capacities of up to approx. 14 mm, depending on the material. This means that not only structural steels, but also stainless steel sheets and metals with flash rust or paint can be cut cleanly. Despite its wide range of functions, the CTM-250 ST is easy to transport, weighing only around 12.9 kg and with compact dimensions. The comprehensive accessory package with MIG, TIG and CUT torches, cables and wear parts enables immediate use.

929,99 €

incl. 19% VAT , plus

Instead of: 1.129,99 €

(Save 17.7%, i.e. 200,00 €)

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

You can purchase a maximum of Units 3 of this item.

Functions

MIG/MAG welding (GMAW): Gas metal arc welding with direct current for steel and stainless steel applications. Inactive/inert gases (MIG, e.g. argon) or active gases (MAG, e.g. CO2 or mixed gas 82/18 Ar/CO2) can be used. Gas and welding wire come out of the torch head together, so that even longer fillet welds can be comfortably welded with one hand. Adjustable wire diameters of 0.6 / 0.8 / 1.0 mm allow optimum adaptation to sheet thickness and seam requirements.
FLUX/flux-cored wire welding (without gas): FLUX welding is based on the MIG/MAG process, but does not require an external shielding gas. Special cored wire (e.g. 0.9 mm) generates its protective atmosphere through the filler core. The CTM-250 ST supports various wire guide rollers (U, V and knurled K profile) to process solid wire, aluminum wire and cored wire with uniform feed - ideal for outdoor applications or locations without a gas cylinder.
DC TIG welding (TIG): Tungsten inert gas welding with direct current from 20-200 A for high-quality, low-spatter weld seams. Suitable for unalloyed and high-alloy steels, stainless steel, copper, brass and similar materials. With argon 4.6/4.8 as shielding gas and a TIG hosepack with tungsten electrode and filler rod, precise fine and visible seams can be produced. The extended TIG menu provides gas advance, gas follow, current increase, current decrease and a pulse function to precisely control the heat input and seam shape.
MMA/E-hand welding (ARC): Manual electrode welding with 20-180 A for coated stick electrodes. The process is suitable for universal use - from workshop to assembly work - and can also be used in windy conditions or outdoors without any problems. Typical electrode diameters of 1.6 to 5.0 mm can be processed, which means that material thicknesses of around 1 to over 8 mm can be covered. Hotstart facilitates ignition, anti-stick reduces sticking, while VRD lowers the open-circuit voltage in the idle state.
CUT plasma cutting with 45 A: Plasma cutting with currents of 15-45 A and compressed air (4 bar). The arc melts the material, the compressed air removes the molten pool and creates the cut. Suitable for all conductive metals such as mild steel, stainless steel, aluminum, copper, brass or titanium, with cutting capacities up to approx. 14 mm (depending on material). The contact ignition makes it easy to start: just touch the workpiece briefly and the contact is maintained for the cut.
4-roller drive - A powerful 4-roller drive ensures reliable wire feed, which also transports thicker welding wires continuously and safely during MIG MAG welding.
Automatic wire feed: The welding wire is automatically removed from the wire reel and fed through the hosepack to the contact tip via the wire feed unit. The feed speed automatically adjusts to the set welding current, which supports a constant arc and uniform penetration.
2-cycle/4-cycle operation: In MAG and DC TIG operation, you can choose between 2-cycle and 4-cycle. 2-stroke is suitable for short spot welds, 4-stroke relieves the strain on longer seams as the torch trigger does not have to be held down permanently.
Voltage and arc correction (MIG/FLUX): The device offers an adjustable open voltage (13-28 V) as well as limited voltage and arc width correction from -5 to +5. This allows the penetration, droplet size and arc width to be fine-tuned in order to optimally influence the weld seam and spatter formation.

Features & benefits

4-in-1 solution with integrated plasma cutter: One device covers TIG, MIG/MAG, MMA/E manual welding and CUT plasma cutting. This reduces investment costs, space requirements and set-up times, as there is no need to change devices for welding and cutting the same workpieces.
High power reserves with compact dimensions: With 20-200 A in MIG/MAG and TIG mode, 20-180 A in MMA mode and 15-45 A when cutting, the CTM-250 ST offers sufficient power reserves - even for thicker cross-sections. At the same time, at only approx. 12.9 kg and 480 x 210 x 360 mm, the device remains handy and easy to transport, ideal for mobile applications.
Solid duty cycle for everyday use: The duty cycle of 15 % at 200 A and 60 % at 100 A (MIG/WIG) as well as 15 % at 45 A in CUT mode allows the maximum power to be used at intervals and continuous work in the medium power range - ideal for repairs, constructions and small series.
Modern IGBT technology and smart cooling: The integrated IGBT power electronics ensure a stable arc, high energy efficiency and low weight. In combination with the powerful fan and overheating protection, reliable continuous operation is possible; in the event of an overload, the device switches off in good time and automatically releases again after cooling down.
Safe working thanks to VRD, Hotstart & Anti-Stick: The VRD function lowers the open-circuit voltage in MMA mode as soon as welding is not in progress - a safety benefit when changing or setting down the electrode. Hotstart improves ignition reliability, anti-stick reduces sticking and puts less strain on the electrode and device.
Finely adjustable welding parameters for MIG/MAG & TIG: Voltage and arc width correction allow precise adjustment of the MIG/FLUX arc, e.g. for deeper penetration or softer seam transitions. In TIG mode, gas advance, gas follow, current increase, current decrease and pulse function are available for precise control of heat input and seam appearance - particularly useful for thin sheets and demanding visible seams.
Ergonomic ST-Guard housing & intuitive control panel: The robust ST-Guard housing reliably protects the electronics and is also ergonomically designed. The clearly laid out control panel with digital display for current and voltage, process selection button, wire diameter selection, gas and mode buttons enables all parameters to be set quickly and logically - even for less experienced users.
Flexible wire and application: By selecting different wire diameters as well as suitable wire guide rollers (U, V, K), the device can be operated with solid, stainless steel and cored wires. This makes the CTM-250 ST a universal partner for car body work, workshop repairs, steel construction, railings, tanks and many other applications.
Comprehensive accessories for an immediate start: The scope of delivery includes fully equipped MIG, TIG and CUT torches, gas and air connections, wire guide rolls, contact tips and other accessories. This means that the device can be used immediately after connecting the power, gas and compressed air without having to retrofit additional basic components.

Note: The appliance is not intended for use in residential areas where power is supplied via a public low-voltage supply system. It may be difficult to ensure electromagnetic compatibility in these areas due to both conducted and radiated interference.

Note: Not suitable for welding aluminum

Technical Data

Model	STEEL MILL CTM 250 ST
Processes	TIG (DC), MIG/MAG, MMA/ARC, FLUX, CUT plasma cutting
Output current MIG \| TIG \| MMA \| CUT	20-200 A \| 20-200 A \| 20-180 A \| 15-45 A
Duty cycle (40 °C) MIG/WIG	15 % at 200 A / 60 % at 100 A / 100 % at 77.5 A
Duty cycle (40 °C) MMA	15 % at 180 A / 60 % at 90 A / 100 % at 70 A
Duty cycle (40 °C) CUT	15 % at 45 A / 60 % at 23 A / 100 % at 17.4 A<
Mains voltage	1 x 230 V AC (±15 %), 50/60 Hz
Maximum mains current (I1max) TIG \| MMA \| MIG \| CUT	26.7 A \| 35 A \| 13 A \| 28.2 A
Protection class	IP21S
Dimensions (L x W x H)	480 x 210 x 380 mm
Weight	12.9 kg
Mains connection	CEE 7/7 Schuko plug
Standards	IEC 60974-1; EN 60974-10 (Class A)
Plasma cutting	Work with compressed air 4 bar, cutting capacity up to approx. 14 mm (depending on material)

Scope of delivery

1 x STAHLWERK CTM-250 ST combination welding machine
1 x WP-26F professional TIG welding torch, 3 m hose package
1 x TIG/TIG accessory set, 8 pieces
1 x Professional plasma hose set AG-60/SG-55, 3 m
1 x Plasma accessory set, 4-piece
1 x water separator with pressure gauge and snap-on quick couplings (male/female)
1 x connecting hose with snap-on quick-release couplings from the device to the water separator
1 x AK-15 professional MIG welding torch, 3 m hose package with Euro central connection
1 x 3-piece MIG accessory set (pre-assembled): Gas nozzle, contact tip 0.8 mm, gas nozzle holder
1 x earth cable 3 m
1 x electrode holder 3 m
1 x wire brush
1 x gas connection hose with quick coupling 5 m
1 x contact tip M6 x 28 - Ø 1.0 mm
1 x contact tip M6 x 28 - Ø 0.8 mm
2 x wire guide roller 0.6 & 0.8 mm with V-profile
1 x wire guide roller 0.8 & 1.0 mm with V-profile (pre-assembled)
2 x wire guide roller 0.8 & 0.9 - especially for cored wire (knurled)
1 x Allen key
1 x assembly wrench
1 x Teflon tape
1 x protective cover
1 x AG-60 25-piece wear parts set
1 x MIG MAG AK 15 wear parts set 28 pieces
1 x TIG ER70S G3 steel welding rods
1 x Welding rods TIG ER307Si high-alloy stainless steel
1 x tungsten electrodes / welding electrodes
1 x MIG MAG premium welding wire ER70S-6 SG2 S100/D100 wire reel
1 x pressure reducer
1 x professional welding helmet

High-quality professional AG-60 plasma hose package with integrated probe protection. Optimal cutting and ignition performance up to 70 A. Thicker hose and more robust wear parts than PT-31.

High quality professional WP-26F TIG hose package with flexible torch head and bend protection at the gas connection. Optimum ignition behaviour up to 200 A. Thicker hose and ergonomic handle. An 8-piece wear part set for immediate start is included in the scope of delivery

Connection of compressed air hoses in seconds thanks to 3/8“ snap-on quick coupling on the unit and water separator. One movement of the hand is enough.

To go with this article we recommend

In stock

STAHLWERK 2 x welding release spray, multifunctional safety spray for welding, suitable for industry, workshop and DIY

20,99 € *

26,24 € per 1 l

In stock

STAHLWERK 3D welding table WT-100 3D ST with 1.000 kg load capacity, D16 hole system and 6 mm worktop 100 x 80 cm, assembly table DIY kit for self-welding made of carbon steel with levelable feet

499,99 € *

In stock

STAHLWERK set of 4 magnetic welding angle 11,3 kg | 25 lbs practical welding magnet | magnetic angle | welding positioner with strong holding force

12,99 € *

In stock

STAHLWERK AG-60 Plasma Accessories Wear Parts Plasma Nozzles + Electrodes + Ceramic Caps for AG-60 / SG-55 CUT Plasma Cutting Torches, Set 25-pieces

28,99 € *

In stock

STAHLWERK Automatic welding helmet BULLET 3-in-1 welding helmet | welding shield | welding mask with true color true color reproduction, automatic darkening DIN 4 to DIN 13 and optical class 1/1/1/2

44,99 € *

In stock

STAHLWERK automatic welding helmet WORKER 3-in-1 welding helmet | welding shield | welding mask with true color true color reproduction, automatic darkening DIN 4 to DIN 13 and optical class 1/1/1/2

29,99 € *

Top

STAHLWERK Pressure reducer for ARGON / CO2 / mixed gas / shielding gas up to 200 bar and 32 L/min for TIG / MIG MAG welding equipment, manufactured according to DIN EN ISO 2503

44,99 € *

In stock

STAHLWERK pressure regulator ST-300 Pro up to 300 bar for standard gas cylinders DIN EN ISO 2503 Pressure regulator made of high-quality brass for welding gases, mixed gases and shielding gases

39,99 € *

In stock

STAHLWERK Nozzle cleaner stainless steel files 13 in 1 welding nozzle cleaner in practical case set of 2, MIG MAG nozzles, oxy-fuel welding nozzles, soldering irons, hot glue guns, carburetor nozzles

16,99 € *

In stock

STAHLWERK Hexagon welding magnet | Powerful magnet for versatile applications with 50 kg adhesive force Set of 2

19,99 € *

In stock

STAHLWERK magnetic welding angle magnetic angle welding magnet with adjustable angles 20° - 200° 22 kg / 48 lbs

28,99 € *

In stock

STAHLWERK Magnet welding angle Magnet welding angle switchable 45° - 165° 30 kg / 66 lbs

31,99 € *

In stock

STAHLWERK MIG MAG welding torch holder with magnetic base, universal torch holder for all MIG torches like MB-15 AK, MB-25 AK, black

16,99 € *

In stock

STAHLWERK MIG MAG welding accessories AK15/MB15 AK14/MB14 wear parts, gas nozzles + nozzle carrier + current nozzles for MIG MAG welding torches, set 28 pieces

20,99 € *

In stock

STAHLWERK MIG/MAG welding wire Ø 0,8 mm, steel SG2 ER70S-6, on 1 kg D100 wire reel with 16 mm mandrel, universal use

12,99 € *

12,99 € per 1 kg

In stock

STAHLWERK MIG/MAG welding wire Ø 0,8 mm, steel SG2 ER70S-6, on 1 kg D100 wire reel with 16 mm mandrel, universally applicable, practical set of 3

29,99 € *

10,00 € per 1 kg

In stock

STAHLWERK MIG/MAG welding wire Ø 0,8 mm, steel SG2 ER70S-6, on 1kg D100 wire reel with 16mm mandrel, universal use, set of 2

20,99 € *

10,49 € per 1 kg

In stock

STAHLWERK Mini pressure regulator ST-215 according to DIN standard EN ISO 2503 pressure regulator up to 200 bar made of high quality brass for Argon | CO2 | Mix 18 | shielding gas for TIG and MIG MAG

25,99 € *

In stock

STAHLWERK Mobile welding table AWT-930 ST 1068 x 532 mm Height-adjustable, foldable workbench | work table | assembly table with 705 - 930 mm stroke range, 450 kg load capacity

135,99 € *

In stock

STAHLWERK welding set | 300 g slag hammer, vibration-inhibiting with pointed and flat chisel | 4-row stainless steel wire brush | 2 kg pack of rutile-coated stick electrodes AWS E6013RR, thick, 2.5 x 350 mm

19,99 € *

In stock

STAHLWERK welding sleeves | welding gauntlets | welding sleeves | welding arm protection | welding protective clothing with elastic waistband made of high-quality split leather

19,99 € *

In stock

STAHLWERK Welding gloves | heat protection gloves | work gloves | heat-resistant gloves made of high-quality split leather for welding and plasma cutting

19,99 € *

In stock

39,99 € *

In stock

STAHLWERK welding gloves extra robust heat protection gloves | work gloves | welding gloves | heat-resistant gloves made of high-quality split leather for welding plasma cutting

21,99 € *

In stock

STAHLWERK Welding protection curtain welding protection curtain 2,4m x 1,8m, UV resistant partition wall made of high quality vinyl plastic, mobile steel frame with rollers

94,99 € *

In stock

22,99 € *

In stock

STAHLWERK Welding rods ER307Si stainless steel high alloy / Ø 1,6 x 500 mm / 1 kg TIG filler metal

23,99 € *

23,99 € per 1 kg

In stock

STAHLWERK welding table | assembly table with 500 kg load capacity and 3 mm worktop 91.5 x 46 x 90 cm in D16 hole system, DIY kit made of heavy-duty carbon steel with levelable stainless steel feet

145,99 € *

In stock

STAHLWERK Welding table extension SA-500 ST 500 x 400 mm mobile welding booth | folding welding table extension for workbenches and assembly tables with D16 perforated plate for clamping tools

41,99 € *

Top

STAHLWERK welding trolley SW-800-ST with 1.5 mm wall thickness | Longlife rubber rollers | Equipment trolley for welding equipment and plasma cutters with cable and hose holder and chain lock for gas cylinders

179,99 € *

In stock

STAHLWERK TIG gas lenses welding accessories with clamping sleeves + ceramic nozzles + tungsten electrodes, wear parts for WP SR Binzel 17 18 26 TIG welding torches, set 24 pieces

34,99 € *

In stock

STAHLWERK TIG glass gas lenses Welding accessories for WP SR Binzel 17 18 26 TIG welding torch 7 pieces

27,99 € *

In stock

STAHLWERK TIG Tungsten welding electrodes 1.6 & 2.4 x 175 mm WL15 gold Thorium-free - universal TIG needles for steel, stainless steel, aluminum, copper 5 pcs each.

42,99 € *

Coming soon

STAHLWERK 3D welding table set, assembly table with D16 hole system and 6 mm worktop as DIY kit in 12-piece set with variable stop, screw clamp, stop bolt with anti-lift device

579,99 € *

Coming soon

STAHLWERK Automatic welding helmet BOOSTER 3-in-1 welding helmet | welding mask with true color true color reproduction, job memory, automatic darkening DIN 4 to DIN 13 and optical class 1/1/1/2

54,99 € *

Coming soon

STAHLWERK MASTER 3-in-1 automatic welding helmet with remote control, folding visor, true color true color reproduction, job memory, automatic darkening DIN 4 to DIN 14 and optical class 1/1/1/1

149,99 € *

Coming soon

STAHLWERK automatic welding helmet RAPTOR 3-in-1 welding mask with LED light, true color true color rendering, job memory, automatic darkening DIN 4 to DIN 13 and optical class 1/1/1/2

69,99 € *

Coming soon

STAHLWERK SPLIT 3-in-1 automatic welding helmet with 180° field of vision, LCD color display, true-color true-color reproduction, job memory, automatic dimming DIN 4 to DIN 14 and optical class

119,99 € *

Coming soon

STAHLWERK Automatic welding helmet TITAN 3-in-1 welding helmet | welding mask with true color true color reproduction, job memory, automatic darkening DIN 4 to DIN 14 and optical class 1/1/1/1

79,99 € *

Coming soon

STAHLWERK Premium TIG glass gas lens set 14-piece welding accessories with glass gas nozzles, welding torch insulator, seals and glass nozzle adapter for WP | SR 17, 18, 26 TIG welding torches

36,99 € *

Coming soon

STAHLWERK Welding torch holder with magnetic base, universal torch holder for TIG and PLASMA, white

16,99 € *

Coming soon

STAHLWERK welder's sleeves | welder's gauntlets | welder's arm protection | welder's protective clothing with Velcro fastener made of high-quality split leather for welding and plasma cutting

21,99 € *

Coming soon

STAHLWERK Welding cap | welding helmet | welding hood | welding mask | flame-retardant protective clothing for welding and plasma cutting

19,99 € *

Coming soon

STAHLWERK Welding table set, assembly table with D16 hole system and 3 mm worktop as DIY kit in set with variable stop, screw clamp, stop bolt with lift-off protection, clamping bolt

225,99 € *

Coming soon

STAHLWERK TIG welding rods ER70S-G3 steel / Ø 1,6 x 500 mm / 1 kg TIG welding consumable filler metal including storage box

11,99 € *

11,99 € per 1 kg

Contact data

First name

Last name

E-Mail

Phone - optional

Question about item

Your question

Manufacturer information

STAHLWERK Schweissgeräte Deutschland GmbH was founded in 1998 and offers original welding equipment as a manufacturer. We are your professional and reliable welding equipment supplier. Product safety carries the registered trademark STAHLWERK. The company responsible for product safety is STAHLWERK Schweissgeräte GmbH
located in Bornheim
Mainstraße 4
53332
Germany. For questions regarding product safety
please contact us at the electronic address info@stahlwerk-schweissgeraete.de or by phone at +49 228 24331713. The person responsible for product safety is Alexander Hamann.

To go with this article we recommend

STAHLWERK 2 x welding release spray, multifunctional safety spray for welding, suitable for industry, workshop and DIY

20,99 € *

26,24 € per 1 l