STAHLWERK Plasma cutter CUT 160 P IGBT with 160 Amp pilot ignition up to 52 mm cutting power / suitable for painted sheets and flash rust

STAHLWERK Plasma cutter CUT 160 P IGBT with 160 Amp pilot ignition up to 52 mm cutting power / suitable for painted sheets and flash rust

SKU: 1151
GTIN: 4260294081512
Category: Plasma cutter | CUT

The powerful STAHLWERK CUT 160 Pilot IGBT plasma cutter with 2T/4T mode and high-performance water cooling delivers a powerful 160 amps and has a precise high-frequency (HF) pilot ignition for first-class ignition behavior. Depending on the material, the cutting capacity is up to 52 mm (mild steel S235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm). The plasma cutter is suitable for all common conductive metals as well as painted sheet metal and rust film. The cutting current can be infinitely adjusted from 20 to 160 amps. The compact device has smart cooling and overheating protection and is easy to transport at just 38.3 kg. The STAHLWERK CUT 160 Pilot IGBT plasma cutter is supplied with a comprehensive accessory package.

1.299,99 €

incl. 19% VAT , plus

Currently out of stock

Device functions & components

The plasma cutter is delivered on a pallet by the DACHSER forwarding company. Please state your mobile phone number when ordering. We need this for the carrier to coordinate the delivery date by phone or SMS!
Please note that additional costs will be incurred if you fail to meet the delivery date agreed with the carrier through your own fault. The shipping company charges 70 euros for each additional delivery attempt.
Plasma / CUT - A plasma jet is generated by means of electricity, which melts the material, which is then removed with compressed air. This allows all conductive metals such as standard steel, stainless steel, copper, aluminum, titanium and many more to be cut precisely and effortlessly.
Cutting thickness - Depending on the material, cuts of up to 52 mm are possible. Structural steel S235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm.
Pilot ignition - High-frequency (HF) pilot ignition for first-class ignition behavior. No contact with the workpiece necessary! The pilot flame establishes the arc. This torch can be operated with a spacer included in the scope of delivery.
Cutting current - Stepless adjustment from 20 to 160 A.
Air afterflow - Air flows after the cutting process is completed to cool the torch and reduce wear on the nozzle and electrode.
2T/4T - determines the control of the operating mode and offers extended control over the current flow. In 2T mode, high-frequency ignition (HF) remains active until the button on the torch is released. In 4T mode, the arc is ignited after pressing and releasing the button once. After pressing and releasing the button again, ignition is terminated.

Device Features & Advantages

IGBT Technology - Latest and most advanced transistor technology enables high performance welding! No transformer, no MOSFET, state-of-the-art IGBT!
Lightweight & Compact Design - Weighing only 38.3 kg and measuring 630 x 320 x 600 mm, the unit is ideal for cutting work anywhere. Innovative IGBT transistors save space and weight compared to old MOSFET technology. No more heavy carrying, thanks to transport wheels under the unit!
Highest efficiency & power - Three-phase AC power (400 V) supplies the unit and allows an output power of real 160 amps.
Smart Cooling & Overheat Protection - State-of-the-art technology, built-in overheat protection and high-performance cooling allow the unit to deliver maximum power.
Water Cooling - The High Performance Water Cooling guarantees optimal cooling of the complete hose package at all times. The water cooler is already included in the scope of delivery!

Technische Daten

Output current	20-160 A
Protection class	IP21S
Mains voltage	400 V AC (+- 15%) / 3 Ph
Mains frequency	50/60 Hz
Maximum mains current (_I1max)	42 A
Maximum effective mains current (_I1eff)	16,3 A
Weight unit	38,3 kg
Dimensions L x W x H (mm) Unit	630 x 320 x 600
Mains connection	CEE32 plug
Air pressure	10 bar
Air flow	min. 240 L / min
Weight water cooler	14 kg
Dimensions L x W x H (mm)	460 x 255 x 370
Standards	IEC 60974-1; EN 60974-10 (Class A)

Lieferumfang

1 x Plasma cutter STAHLWERK CUT 160 P
1 x Professional plasma hose package WSD-200, 5 meters
1 x 3-piece plasma accessory set (3 parts are already pre-assembled on the plasma torch):
- 1 x plasma nozzle
- 1 x plasma electrode
- 1 x ceramic cap
1 x 5 meter ground cable
1 x guide carriage with spacer
1 x water separator with pressure gauge and snap-on quick couplings
1 x Air connection hose with snap-on quick coupling 5 m
1 x Water cooler with connecting hoses to the device
1 x Teflon tape

High-quality professional WSD-200 plasma hose package with water cooling. Optimal cutting and ignition behavior up to 160 A.

Robust grounding clamp with modern 13 mm connection and 25 mm² cable cross-section. Best conductivity through high quality copper cables.

Quick connection of the air hoses thanks to 3/8" snap-on quick coupling on the device and water separator. One handgrip is enough.

In stock

STAHLWERK Compressed air maintenance unit WE-10 ST with lubricator up to 10.5 bar for air compressors

36,09 € *

In stock

1.030,09 € *

In stock

STAHLWERK Mass magnet up to 300 A / switchable mass magnet for welding cable

42,99 € *

In stock

STAHLWERK Ground clamp ground clamp up to 500 A solid brass accessories for welding equipment and plasma cutters.

20,69 € *

In stock

STAHLWERK protective hose flex cover for hose packages made of genuine leather - 5 meters / heat and fire resistant

34,99 € *

In stock

STAHLWERK Welding torch holder with magnetic base, universal torch holder for TIG, MIG and plasma, white.

14,99 € *

In stock

STAHLWERK Welder chalk in set of 3 welder marker pen with 4 soapstone chalk pieces each

14,49 € *

In stock

STAHLWERK welding gloves genuine leather thick / protective clothing / gloves for welding and plasma cutting

17,59 € *

In stock

STAHLWERK welding clothing set - welding apron + welding gloves thick

46,99 € *

In stock

STAHLWERK Water separator up to 10.5 bar for air compressors air tools maintenance unit filter compressed air pressure regulator connection 1/4

18,99 € *

In stock

STAHLWERK WSD-200 plasma accessories set 25 pieces, wear parts, plasma nozzles + electrodes + ceramic caps for WSD-200 CUT plasma cutter torch

59,99 € *

Coming soon

STAHLWERK Compressed air hose automatic reel DA-30 ST 30 m

115,99 € *

Coming soon

STAHLWERK ST-950 XB full automatic real color welding helmet with 3 in 1 function, black shiny, incl. 5 spare discs & bag

69,99 € *

Coming soon

STAHLWERK fully automatic Real Colour welding helmet with 3-in-1 function ST-990 XB, glossy black

69,99 € *

Contact data

First name

Last name

E-Mail

Phone - optional

Question about item

Your question

Contact data

First name - optional

Last name - optional

E-Mail

Manufacturer information

STAHLWERK Schweissgeräte Deutschland GmbH was founded in 1998 and offers original welding equipment as a manufacturer. We are your professional and reliable welding equipment supplier. Product safety carries the registered trademark STAHLWERK. The company responsible for product safety is STAHLWERK Schweissgeräte GmbH, located in Bornheim, Mainstraße 4, 53332, Germany. For questions regarding product safety, please contact us at the electronic address info@stahlwerk-schweissgeraete.de or by phone at +49 228 24331713. The person responsible for product safety is Alexander Hamann.

To go with this article we recommend

STAHLWERK Compressed air maintenance unit WE-10 ST with lubricator up to 10.5 bar for air compressors

36,09 € *