STAHLWERK Welder AC/DC TIG 200 Plasma ST IGBT full equipment / Combination welder / 200 Amp TIG + MMA welder with 50 Amp CUT plasma cutter, suitable for aluminum

https://img.youtube.com/vi/IX8RBZRclug/default.jpg

https://img.youtube.com/vi/rDl2qihN9uo/default.jpg

STAHLWERK Welder AC/DC TIG 200 Plasma ST IGBT full equipment / Combination welder / 200 Amp TIG + MMA welder with 50 Amp CUT plasma cutter, suitable for aluminum

SKU: 1004
GTIN: 4260294080041
Category: TIG AC/DC welding machines with CUT

AC/DC TIG welding - alternating current (AC) and direct current (DC). Welding of almost all metals, such as steel, stainless steel, aluminum, copper and many others. Plasma / CUT - A plasma jet is generated by means of current, which melts the material, which is then removed with compressed air. In this way, all conductive metals such as standard steel, stainless steel, copper, aluminum, titanium and many more can be cut precisely without any effort. Cut thickness - cut-offs are possible up to 12 mm depending on the material. Mild steel ST37 up to 12 mm, V2A or V4A up to 8 mm, aluminum up to 5 mm. 3 in 1 combination unit - TIG & MMA welding is possible up to 200A, plasma cutting up to 50A. IGBT Technology - Latest and most advanced transistor technology enables high power welding! No transformer, no MOSFET, most advanced IGBT! Attention - Bottle connection: W21.8 x 1/14" - Gas cylinders from the Netherlands and UK may have a different connection! Please check the connections for compatibility before buying!

741,69 €

incl. 19% VAT , plus

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

You can purchase a maximum of Units 3 of this item.

Equipment functions & components

AC/DC TIG welding - alternating current (AC) and direct current (DC). Welding of almost all metals, such as steel, stainless steel, aluminum, copper, etc.
Plasma / CUT - By means of current, a plasma jet is generated which melts the material, which is then removed with compressed air. In this way, all conductive metals such as standard steel, stainless steel, copper, aluminum, titanium and many more can be cut precisely without any effort.
Cut thickness - cut-offs are possible up to 12 mm depending on the material. Mild steel ST37 up to 12 mm, V2A or V4A up to 8 mm, aluminum up to 5 mm.
3 in 1 combination unit - TIG & MMA welding is possible up to 200A, plasma cutting up to 50A.
IGBT Technology - Latest and most advanced transistor technology enables high power welding! No transformer, no MOSFET, most advanced IGBT!
Attention - Bottle connection: W21.8 x 1/14" - Gas cylinders from the Netherlands and UK may have a different connection! Please check the connections for compatibility before buying!

Device features & advantages

Lightweight & compact design - only 13.2 kg weight and dimensions of 455 x 220 x 370 mm. Innovative IGBT transistors save space and weight compared to old MOSFET technology. No more heavy carrying!
HF ignition (TIG) - enables non-contact ignition and provides much better welding results. No LIFT ARC, no strike ignition!
Contact Ignition (CUT) - High frequency (HF) contact ignition for first class ignition performance. A brush over the workpiece is sufficient.
Cutting current (CUT - Stepless adjustment from 15 to 50 A.
Air after-run (CUT) - After the cutting process is finished, air automatically flows in to cool the torch and reduce wear on the nozzle and electrode.

2T/4T (TIG) - determines control of the operating mode and provides advanced control over the current flow. In 2T mode, high frequency (HF) ignition remains active until the button on the torch is released. In 4T mode, pressing and releasing the button once ignites the arc. After pressing and releasing again, the ignition is terminated. Some functions such as current reduction are only possible in 4T.
Current reduction (TIG) - prevents the formation of shrink marks (end craters) at the end of the weld.
Gas pre-run and gas post-run (TIG) - protect the tungsten electrode from excessive wear and protect the weld seam from oxidation. The parameters can be set individually and separately. They specify how long gas should flow before and after ignition.
AC balance - is a variable setting between breaking up the oxide layer (-) and deeper penetration (+). This helps to act on properties of different materials and alloys.
Hotstart - Automatic voltage increase at start-up for better ignition results.
Anti-Stick - Automatic shutdown of welding current when the electrode sticks allows for easy removal.
Highest Efficiency & Power - Single phase AC (230V) power supplies the unit and allows output power of true 200 amps.
Smart Cooling & Overheat Protection - State-of-the-art technology, built-in overheat protection and high-performance cooling allow maximum power to be retrieved.
TIG (Tungsten Inert Gas) - Gas shielded welding with inert/inactive gases such as Argon 4.6 (99.996%). An arc is created between the tungsten electrode and the workpiece in an argon bell. This melts the material and any filler material added. A weld seam is formed.
MMA electrode welding / ARC welding - a universal welding process. An arc melts the electrode to form the weld. No shielding gas is required.

Note: The unit is not intended for use in residential areas where power is supplied by a public low-voltage power system. It may be difficult to ensure electromagnetic compatibility in these areas due to both conducted and radiated interference.

Technische Daten

Output current (TIG / MMA / CUT)	10-200 A (WIG/MMA) / 20-50 A (CUT)
Protection class	IP21S
Insulation class	F
Mains voltage	230 V AC (+-15%) / 1 ~ (single-phase)
Mains frequency	50/60 Hz
Maximum mains current (_I1max) (TIG / MMA / CUT)	27.7 A / 39.7 A / 34.4 A
Maximum effective mains current (_I1eff) (TIG / MMA / CUT)	14.5 A / 13.5 A / 15.2 A
Compressor requirements	4 bar / min. 100 L/min
weight	13.2 kg
Dimensions L x W x H (mm)	455 x 220 x 370
Mains connection	Schuko type CEE 7/7
Standards	IEC 60974-1; EN 60974-10 (Class A)

Lieferumfang

1 x STAHLWERK AC/DC TIG 200 PLASMA ST IGBT welding machine
1 x Professional TIG welding torch WP-26F / hose package 3 meters
1 x TIG TIG accessory set 8 pieces:
- 3 x gas nozzles sizes: 5, 6, 7
- 1 x clamping sleeve size 1.6
- 1 x clamping sleeve housing size 1.6
- 2 x torch caps - one short and one long
- 1 x universal tungsten electrode
  * Pre-assembled accessories from the picture of the welding torch are part of the 8-piece set
1 x professional plasma hose package AG-60/SG-55 3 meters.
1 x 3-piece plasma accessory set (this is already pre-assembled on the plasma torch)
1 x water separator with pressure gauge and snap-on quick couplings
1 x connecting hose with snap-on quick-release couplings from the device to the water separator, incl. 6-piece connection set
1 x 3 meter earth cable
1 x electrode holder 3 meters
1 x wire brush
1 x Gas connection hose with quick-release coupling 5 meters
1 x protective cover
1 x AG-60 25-piece wear parts set (10 x plasma nozzles, 10 x plasma electrodes, 5 x ceramic caps)
1 x TIG welding rods STAHLWERK ER70S-G3 steel / ø 2.4 x 500 mm / 1 kg
1 x STAHLWERK ER307Si TIG welding rods high-alloy stainless steel / ø 1.6 mm x 500 mm / 1 kg
1 x TIG welding rods ER4043Si5 aluminum 1.6 mm x 500 mm 1 kg
1 x tungsten electrodes / welding electrodes WL15 gold 5 x 1.6 mm + 5 x 2.4 mm
1 x magnetic tool set 2 x magnetic angle welding angle 4 kg / 9 lbs + earth clamp
1 x pressure reducer
1 x STAHLWERK fully automatic welding helmet ST-900X black matt

High-quality professional AG-60 plasma hose package with integrated probe protection. Optimum cutting and ignition performance up to 70 A. Thicker hose and more robust wear parts than PT-31.

High quality professional WP-26F TIG hose package with flexible torch head and bend protection at the gas connection. An 8-piece consumable set for immediate start is included.

Connection of compressed air hoses in seconds thanks to 3/8" snap-on quick coupling on the unit and water separator. One handle is all it takes. Including 5 metre gas connection hose with quick coupling.