Functions
- Accurate air quality meter for easy detection of indoor and outdoor pollutants.
- Pollutant concentrations are measured in real time after switching on and calibration. Even the smallest amounts from 0.01 mg/m³ are reliably detected.
- The device reliably determines the formaldehyde concentration. Formaldehyde is a common indoor pollutant that is considered carcinogenic by the German Federal Office for Risk Assessment. Formaldehyde contamination of the air is mostly due to evaporation from wood-based materials (e.g. glued wood, chipboard or adhesives) or tobacco consumption.
- The air quality monitor measures in a range of 0.000-2.888 mg/m³ (HCHO) and 0.000-9.999 mg/m³ (TVOC).
- The measured values are displayed on an easy-to-read, illuminated LED digital display. In addition, the results are displayed by signal diodes in the traffic light colors red, yellow and green.
- If a previously defined limit value is exceeded, an acoustic warning signal sounds.
- With integrated charge level indicator for continuous operation.
Features & Advantages
- Accurate meter for reliable detection of moisture in walls, ceilings, wood, plaster, gypsum, cement, etc. The moisture meter allows measurements up to 40 mm depth.
- Material-protecting measurements thanks to spherical head with built-in high-frequency sensors. Surfaces are not damaged during measurement.
- A clear, illuminated LDC display shows minimum and maximum values as well as the short messages "Dry", "Risk" and "Wet" appropriate to the set building material. The moisture meter is very user-friendly and can be operated intuitively.
- Preset audible alarms warn the user when moisture measurement values exceed the programmed reference values.
- The meter is delivered pre-calibrated and can be used directly.
Technische Daten
Model | STAHLWERK Air Quality Meter LM-10 ST |
Measuring range HCHO | 0,000-2,888 mg/ m³ |
Measuring range TVOC | 0,000-9,999 mg/ m³ |
Power supply | 2 x AA batteries |
Size (L x W x H) | 140 x 45 x 25 mm |
Weight (with batteries) | 93 g |
Model | STAHLWERK Moisture Meter FM-100 ST |
Measuring depth | 20 - 40 mm |
Measuring range | 0 - 100 % |
Optimal operating temperature | 0 - 45° C |
Display type | LCD |
Power supply | 4 x 1.5 AAA batteries |
Dimensions (L x W x H) | 235 x 73 x 30 mm |
Weight | 280 g |
Lieferumfang
- 1 x STAHLWERK Air Quality Meter LM-10 ST
- 2 x AA batteries
- 1 x STAHLWERK FM-100 ST moisture meter
- 4 x 1.5 AAA batteries