STAHLWERK Welder MIG MAG 160 M IGBT / fully synergic 5 in 1 combination unit with real 160 amps and 2-roll drive / flux cored wire, MIG MAG, ARC MMA, Lift TIG

https://img.youtube.com/vi/vJpxCyhVd7c/default.jpg

STAHLWERK Welder MIG MAG 160 M IGBT / fully synergic 5 in 1 combination unit with real 160 amps and 2-roll drive / flux cored wire, MIG MAG, ARC MMA, Lift TIG

SKU: 1782
GTIN: 4260294087828
Category: MIG MAG welding machines

The very compact and lightweight STAHLWERK MIG/MAG-160 M gas-shielded arc welder works with up to 160 amps and is suitable for MIG/MAG, Lift-TIG and MMA welding. One advantage of this compact combination welder, which weighs just 4.5 kg, is that flux cored wire can be used. Welding without shielding gas is therefore also possible. In addition to smart cooling with integrated overheating protection, the welding machine has a synergic wire feed. The speed of the wire feed is automatically regulated by the set welding current. Despite the extensive functions, the welding machine is powerful and reliable thanks to advanced IGBT technology. The MIG/MAG-160 M is supplied with a comprehensive accessory package.

174,99 €

incl. 19% VAT , plus

Currently out of stock

Device functions & components

MIG/MAG - Metal arc welding with direct current (DC). Welding can be done with inactive/inert (MIG, e.g. argon) or with active (MAG, e.g._CO2) gases. Gas and welding wire come from one torch head, allowing welding operations to be performed with only one hand.
Fully synergic device: The voltage (volts) and the wire feed are automatically adjusted to the set welding current. Thus, the device is very easy to use, especially for beginners.
5 in 1 combination device - MIG/MAG, flux cored wire, lift TIG & MMA welding is possible up to 160 A.
IGBT Technology - Latest and most advanced transistor technology enables highest power and high duty cycle (ED)! No transformer, no MOSFET, most modern IGBT!
Lightweight & compact design - only 4.5 kg weight and dimensions of 320 x 140 x 260 mm. Innovative IGBT transistors save space and weight compared to old MOSFET technology. No more heavy carrying!

Equipment features & benefits

Highest Efficiency & Power - Single phase AC (230 V) power supplies the welder and allows output power of true 160 amps.
Smart Cooling & Overheat Protection - State-of-the-art technology, built-in overheat protection, and high-performance cooling allow for maximum power retrieval.
Flux-Cored Wire - All of our units can use flux-cored wire. This allows welding without shielding gas.
Automatic wire feed - the speed of the wire feed is automatically controlled by the set welding current.
Automatic voltage control (volts) - the voltage automatically adjusts to the set welding current.

Wire coil - Commercially available 1 kg wire coils can be processed here. The spool mandrel can accommodate 16 mm spools.
Wire drive roller - by simply changing the drive roller, different wire thicknesses can be used (0.6 mm / 0.8 mm / 1.0 mm).
MMA electrode welding / MMA welding - is a universal welding process. No shielding gas is required.
Lift TIG - With a separately available (not included) hose package, the unit can also be used to weld DC TIG (strike ignition).

Note: Observe the correct amperage for a perfect welding result:
For welding with 0.6 wire, at least 60 amps are required
For welding with 0.8 wire at least 80 amps are required
Welding with 1.0 wire requires at least 100 amps

Note: The unit is not intended for use in residential areas where power is supplied by a public low-voltage power system. It may be difficult, due to both conducted and radiated interference, to ensure electromagnetic compatibility in these areas.

Note for our United Kingdom customers:
Please note that import duties and United Kingdom Import VAT apply to goods valued at GBP 135 or more. Customs will only release the delivery once the customs duties have been paid. Therefore, please note the delivery status by checking the tracking number.

Technische Daten

Model	MIG MAG-160 M
Output current MIG/MAG \| TIG \| MMA	40 - 160 A
Protection class	IP21S
Mains voltage	1 x 230 V AC (+- 15%)
Mains frequency	50/60 Hz
Maximum mains current (_I1max) MIG/MAG \| TIG \| MMA	26.3 A \| 19.5 A \| 31.5 A
Maximum effective mains current (_I1eff) MIG/MAG \| TIG \| MMA	8.3 A \| 6.2 A \| 10 A
Weight	4,5 kg
Dimensions L x W x H (mm)	320 x 140 x 260
Mains connection	CEE 7/7 Schuko plug
Standards	IEC 60974-1; EN 60974-10 (Class A)

Lieferumfang

1 x STAHLWERK MIG 160 M IGBT welding machine
1 x Professional MIG welding torch AK-15 / hose package 2 meters. This is permanently installed on the device
1 x 3-piece MIG accessory set (this is already pre-assembled on the MIG/MAG torch):
- 1 x gas nozzle
- 1 x contact tip 0.8 mm
- 1 x gas nozzle holder
1 x contact tip M6 x 28 - ø 0.8 mm
1 x contact tip M6 x 28 - ø 1.0 mm
1 x welding shield
1 x 0.5 kg filler wire roll 0.8 mm
1 x earth cable 3 meters
1 x electrode holder 3 meters
1 x Gas connection hose with quick coupling 5 meters
1 x wire guide roll 0.6 mm & 0.8 mm (0.8 mm & 1.0 mm is already installed in the device)
1 x protective cover

AK-15 MIG / MAG hose package which is permanently installed on the welding machine. Optimal welding and ignition behavior up to 200 A. A 3-part set of wear parts for immediate start is included in delivery.

Robust electrode holder with modern 9 mm connection and 25 mm² cable cross-section. Best conductivity through high quality copper cables. Different angles for stick electrodes possible.

Robust grounding clamp with modern 9 mm connection and 25 mm² cable cross-section. Best conductivity through high quality copper cables.

In stock

ABICOR BINZEL Super Gun Spray NF Set of 2 400 ml Welding Protection Spray | Release Spray | Nozzle Spray | Release Agent | Welding Spray for the professional protection of welding torches, gas and power nozzles

11,99 € *

14,99 € per 1 l

Top

STAHLWERK Pressure reducer for ARGON | CO2 | mixed gas | shielding gas up to 200 bar and 32 L/min for TIG and MIG MAG welding equipment, manufactured according to DIN EN ISO 2503

44,99 € *

In stock

STAHLWERK Nozzle cleaner / stainless steel files 13 in 1 welding accessories for MIG MAG nozzles, oxyacetylene welding nozzles, soldering irons, hot glue guns, carburetor nozzles.

7,99 € *

In stock

STAHLWERK MIG MAG torch holder black with magnetic base

14,99 € *

In stock

STAHLWERK MIG MAG CuSi3 welding wire 0.8 mm 1 kg wire roll

46,99 € *

46,99 € per 1 kg

In stock

STAHLWERK MIG MAG stainless steel ER 307 Si welding wire 0,8 mm on 1 kg wire roll

23,99 € *

23,99 € per 1 kg

In stock

STAHLWERK MIG MAG premium welding wire - flux cored wire E71T-GS Ø 0,8 mm S100/ D100 wire roll with 1 kg / flux cored wire

12,99 € *

12,99 € per 1 kg

In stock

STAHLWERK MIG MAG welding wire ER70S-6 SG2 Ø 0,6 mm S100/D100 wire roll 1 kg

11,99 € *

11,99 € per 1 kg

In stock

STAHLWERK Welder chalk in set of 3 welder marker pen with 4 soapstone chalk pieces each

16,99 € *

Top

STAHLWERK ST-990 XTC fully automatic Real Colour, welding helmet with 3 in 1 function, matt black

77,29 € *

Coming soon

2 × magnetic angle welding angle 11.3 + 34 kg / 25 + 75 lbs

14,49 € *

Coming soon

STAHLWERK MIG MAG Premium welding wire ER70S-6 SG2 Ø 0,8 mm S100/D100 wire roll 1 kg

12,99 € *

12,99 € per 1 kg

Coming soon

STAHLWERK MIG MAG Premium welding wire ER70S-6 SG2 Ø 1,0 mm S100/D100 wire roll1 kg

11,99 € *

11,99 € per 1 kg

Coming soon

STAHLWERK welding clothing set - welding apron + welding gloves + arm splash protection + TIG fingers

79,99 € *

Coming soon

STAHLWERK welding table assembly table DIY kit with solid 12 mm worktop, heavy-duty S355 steel, powder-coated legs, levelable stainless steel feet, load capacity up to 1.5 t

299,99 € *

Coming soon

STAHLWERK welding trolley / welding equipment trolley with 1.5 mm wall thickness, equipment trolley for welding equipment and plasma cutter with holder for hoses and cables incl. sturdy chain safety device for gas cylinders

189,99 € *

Contact data

First name

Last name

E-Mail

Phone - optional

Question about item

Your question

Contact data

First name - optional

Last name - optional

E-Mail

Manufacturer information

STAHLWERK Schweissgeräte Deutschland GmbH was founded in 1998 and offers original welding equipment as a manufacturer. We are your professional and reliable welding equipment supplier. Product safety carries the registered trademark STAHLWERK. The company responsible for product safety is STAHLWERK Schweissgeräte GmbH
located in Bornheim
Mainstraße 4
53332
Germany. For questions regarding product safety
please contact us at the electronic address info@stahlwerk-schweissgeraete.de or by phone at +49 228 24331713. The person responsible for product safety is Alexander Hamann.

To go with this article we recommend