B-goods: Plasma cutter CUT 50 ST IGBT

SKU: 1211-001-bware
GTIN: 4260294082113
Category: Second choice

Compact, lightweight construction with the greatest possible mobility
- Accurate and very stable arc,
- Cutting power up to 14 mm,
- HF high-frequency contact ignition,
- Clean cuts,
- Good cutting quality

199,99 €

incl. 19% VAT , plus

Low stock level
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Device functions & components

Plasma / CUT - A plasma jet is generated by means of electricity, which melts the material, which is then removed with compressed air, allowing all conductive metals such as standard steel, stainless steel, copper, aluminum, titanium and many more to be cut precisely and effortlessly.
Cutting thickness - Depending on the material, cuts of up to 14 mm are possible. Mild steel ST37 up to 14 mm, V2A or V4A up to 8 mm, aluminum up to 5 mm.
Contact ignition - High-frequency (HF) contact ignition for first-class ignition behavior.
Cutting current - Stepless adjustment from 15 to 50 A.
Air after-run - After the cutting process is complete, air flows automatically to cool the torch and reduce wear on the nozzle and electrode.

Device features & advantages

IGBT technology - The latest and most modern transistor technology enables the highest performance and duty cycle (ED) of 60 % at full power! No transformer, no MOSFET, state-of-the-art IGBT!
Lightweight & compact design - With only 7.2 kg weight and dimensions of 400 x 175 x 280 mm, the device is ideal for cutting work anywhere. Innovative IGBT transistors save space and weight compared to the old MOSFET technology - no more heavy carrying!
Highest efficiency & performance - single-phase alternating current (230 V) supplies the device and allows an output power of real 50 amps.
Smart cooling & overheating protection - State-of-the-art technology, integrated overheating protection and high-performance cooling enable maximum power to be called up.

Technical Data

Output current CUT	15-50 A
Duty cycle CUT	60 % at 50 A / 100 % at 38 A
Protection class	IP21
Insulation class	F
Mains voltage	230 V AC (+-15%) / 1 ~ (single-phase)
Mains frequency	50/60 Hz
Maximum connected load	37,2 A
Effective connected load	28,8 A
Weight	7.2 kg
Dimensions L x W x H (mm)	400 x 175 x 280
Mains connection	Schuko type CEE 7/7
Standards	IEC 60 974-1;CE
Air pressure	3.5 - 4 bar
Air flow rate	min. 100 L / min

Scope of delivery

The STAHLWERK CUT 50 ST plasma cutter.
Professional plasma hose package "AG-60/SG-55" 5 meters.
3-piece plasma accessory set (this is already pre-assembled on the plasma torch) :
- 1 × plasma nozzle
- 1 × plasma electrode
- 1 × ceramic cap
Ground cable 5 meters.
Water separator with pressure gauge and snap-on quick couplings
Connecting hose with snap-on quick couplings from the device to the water separator, incl. 6-piece connection set.
Air connection hose with Snap-on quick-release coupling 5m.

High-quality professional AG-60 plasma hose package with integrated button protection. Optimal cutting and ignition behavior up to 70 A. Thicker hose and more robust wear parts than PT-31.

Robust grounding clamp with modern 9 mm connection and a strong cable cross-section. Best conductivity through high quality copper cables.

Quick connection of the air hoses thanks to 3/8" snap-on quick coupling on the device and water separator. One handgrip is enough.

In stock

STAHLWERK AG-60 Plasma Accessories Wear Parts Plasma Nozzles + Electrodes + Ceramic Caps for AG-60 / SG-55 CUT Plasma Cutting Torches, Set 25-pieces

28,99 € *

In stock

STAHLWERK AG-60 Plasma Accessories Wear Parts Plasma Nozzles + Electrodes + Ceramic Caps for AG-60 / SG-55 CUT Plasma Cutting Torch, Set 50-pieces

47,99 € *

In stock

STAHLWERK CUT plasma cutting torch AG-60 / SG-55 hose package 8 meters up to 70A

72,99 € *

Top

269,99 € *

In stock

STAHLWERK Plasma torch AG-60 / SG-55 with 5 meter hose package plasma cutter up to 70A welding equipment original accessories

57,99 € *

In stock

STAHLWERK Welding torch holder with magnetic base, universal torch holder for TIG and PLASMA, white

16,99 € *

In stock

STAHLWERK ST-450R automatic welding helmet fully automatic dimming with adjustable parameters including 5 replacement lenses

33,99 € *

Contact data

First name

Last name

E-Mail

Phone - optional

Question about item

Your question

Manufacturer information

STAHLWERK Schweissgeräte Deutschland GmbH was founded in 1998 and offers original welding equipment as a manufacturer. We are your professional and reliable welding equipment supplier. Product safety carries the registered trademark STAHLWERK. The company responsible for product safety is STAHLWERK Schweissgeräte GmbH
located in Bornheim
Mainstraße 4
53332
Germany. For questions regarding product safety
please contact us at the electronic address info@stahlwerk-schweissgeraete.de or by phone at +49 228 24331713. The person responsible for product safety is Alexander Hamann.

Matching accessories for this device