Features & Benefits
- Precise Process Control: The oscillating laser beam distributes energy evenly across the joint area and enables clean, controlled welds with a customized seam width.
- High Beam Quality: Fiber laser technology provides stable, reproducible beam guidance and operates with low maintenance, requiring no regular resonator adjustments.
- Soft Start and Soft Stop: Configurable power ramps reduce thermal stress when turning the laser power on and off.
- Intuitive operation: Touchscreen for displaying operating states, parameters, and error messages, as well as for setting process and operating parameters.
- Safety concept for Laser Class 4: Laser enable switch, emergency stop, safety foot pedal, safety-monitored workpiece contact, and interface for door monitoring and external warning lights.
- No Automatic Restart: Following a safety-related shutdown, power restoration, or system reset, automatic restart of the laser emission is prevented.
- Active hybrid cooling: Water- and refrigerant-based cooling system with coolant monitoring for temperature control of the laser energy source and cooling of the welding torch.
- Professional wire feed: Motorized roller drive with touchscreen control, pulse mode, and adjustable parameters such as start delay, retraction length, feed length, and manual feed.
SAFETY NOTICE: The laser welding machine is classified as Laser Class 4. When operating a Class 4 laser welding system, appropriate personal protective equipment (PPE) must be worn. The selection of PPE must be based on the operator’s risk assessment. The PPE must comply with applicable European directives, regulations, and harmonized standards. Therefore, when welding, cutting, or removing rust, it is absolutely mandatory to wear laser safety goggles under the welding helmet. Wear the helmet only in combination with the safety goggles, as the welding helmet provides protection only against stray light and the thermal effects of the arc.
SERVICE NOTE: Please contact our service team after your purchase. Our service representatives will provide you with product-specific training materials and instruct you on the safe and proper use of the laser welding machine. This training is intended to convey safety-related information for the commissioning and operation of the device. It does not replace the operator’s obligation to comply with applicable legal regulations, official requirements, and the operating instructions, and to ensure that the device is used exclusively by appropriately trained and qualified personnel. In addition, we recommend the training course for laser safety officers in accordance with § 5 OStrV and DGUV 303-005 offered by TÜV Rheinland.
