Second choice STAHLWERK welder MIG MAG 200 Spot Puls Pro, full-synergic IGBT inverter, 5 in 1 combination unit with spot function and 200 Amp, Alu | Flux-cored wire | MIG MAG | ARC MMA | Lift TIG | Pulse

https://img.youtube.com/vi/Ydv5S_s9FPA/default.jpg

Second choice STAHLWERK welder MIG MAG 200 Spot Puls Pro, full-synergic IGBT inverter, 5 in 1 combination unit with spot function and 200 Amp, Alu | Flux-cored wire | MIG MAG | ARC MMA | Lift TIG | Pulse

SKU: 1154-bware
GTIN: 4260746549065
Category: Second choice

Second choice The STAHLWERK MIG MAG 200 Puls Pro Plus is a fully synergic 5 in 1 IGBT DC welder with real 200 amps. The 5 in 1 combination welder has a spot function and is suitable for flux-cored wire | MIG MAG | ARC MMA | Lift-TIG | Pulse. The spot welding function is particularly suitable in the automotive sector for thin body parts. As a result, tack welds are precisely reproducible and uniform. The pulse function means that only a small amount of heat enters the workpiece, making the shielding gas welder also suitable for welding aluminum. The fully synergic welder automatically adjusts the voltage and wire feed via the preset welding current. The welding unit is built with the latest IGBT technology. This enables highest performance at high duty cycle. The device has a 4-roll drive and can process both 1 kg and 5 kg rolls. Thanks to the adjustable gas advance, the shielding gas flow starts before the arc is ignited. This prevents the workpiece from coming into contact with air at the start of welding. This protects the weld seam from oxidation. The gas lead time can be set individually depending on the welding requirement.

429,99 €

incl. 19% VAT , plus

Currently out of stock

Functions

5 in 1 combination unit - aluminum welding, MIG MAG, flux cored, lift TIG, MMA & pulse MIG welding is possible up to 200 A.
Spot welding function. Especially suitable in the automotive field for thin body parts. This makes tack spots precisely reproducible and uniform.
MIG pulse - the pulse function keeps heat input low and enables welding of aluminum.
IGBT Technology - Latest and most advanced transistor technology enables highest power and high duty cycle (ED)! No transformer, no MOSFET, most modern IGBT!
Preflow / Gas Advance. Thanks to the gas preflow, the protective gas flow starts before the arc is ignited. This prevents the workpiece from coming into contact with air at the start of welding. This protects the weld seam from oxidation. The gas lead time can be individually adjusted according to the welding requirements.
MIG MAG - metal arc welding with direct current (DC). Welding can be done with inactive/inert (MIG, e.g. argon) or with active (MAG, e.g. CO²) gases. Gas and welding wire come from one torch head and allow welding to be performed with only one hand.

Features & Advantages

Various welding parameters are adjustable. It is suitable for precise welding of thin sheet as well as sheet metal and stainless steel. Due to the pulse function, the MIG MAG-200 Puls Pro Plus is also suitable for aluminum.
Fully synergic device: About the set welding current automatically adjusts the voltage (volts) and also the wire feed always suitable with. Thus, the device is very easy to use, especially for beginners.
Light & compact design - only 10.8 kg weight and dimensions of 460 x 210 x 350 mm. Innovative IGBT transistors save space and weight compared to the old MOSFET technology. No more heavy carrying!
Highest efficiency & power - Single phase AC power (230 V) supplies the welder and allows an output power of real 200 amps.
Smart Cooling & Overheat Protection - State of the art technology, built-in overheat protection and high performance cooling allow maximum power to be retrieved.
Flux-Cored Wire - All of our units can use flux-cored wire. This allows welding without shielding gas.
4 roller drive - reliable and powerful wire feed. Thanks to 4 drive rollers, even thicker wires are continuously and safely fed.

Automatic wire feed - the speed of the wire feed is automatically controlled by the set welding current.
Automatic voltage control (volts) - the voltage automatically adjusts to the set welding current.
Wire spool - commercially available 1 kg and 5 kg wire spools can be processed. The universal spool mandrel can accommodate both 16 and 50 mm spools.
Wire drive rolls - by simply changing the drive rolls from 0.6 mm & 0.8 mm, different wire thicknesses can be used. By changing to the 1.0 mm & 1.2 mm drive rolls with 'U' profile, aluminum wire can also be used.
MMA electrode welding / MMA welding - is a universal welding process. No shielding gas is required.
Lift TIG - With a separately available (not included) hose package, the unit can also be used to weld DC TIG (strike ignition).
VRD (Voltage Reduction Device). Manual on/off of the VRD function allows the output voltage of the welding machine to be lowered to a safe level to protect the operator when touching the electrode while not welding.

Note: The unit is not intended for use in residential areas where power is supplied by a public low-voltage power system. It may be difficult, due to both conducted and radiated interference, to ensure electromagnetic compatibility in these areas.

Technical Data

Model	MIG MAG-200 Pulse Pro Plus
Output current Lift-TIG / MMA	20-180 A
Duty cycle MIG (40°C)	15% at 200 A / 100% at 77 A
Duty cycle Lift-TIG / MMA (40°C)	15% at 180 A / 100% at 70 A
Protection class	IP21S
Mains voltage	1 x 230 V AC (+- 15%)
Mains frequency	50/60 Hz
Maximum mains current (I1max) MIG / Lift-TIG / MMA	32 A / 22 A / 34 A
Maximum effective mains current (I1eff) MIG / Lift-TIG / MMA	12,4 A / 8,5 A / 13,2 A
Weight	10,8 kg
Dimensions L x W x H (mm)	460 x 210 x 350
Mains connection	CEE 7/7 Schuko plug
Standards	IEC 60974-1; EN 60974-10 (Class A)
Certified by	SGS Standards Technical Services Co., Ltd.

Scope of delivery

1 x welding machine MIG MAG-200 Pulse Pro Plus
1 x Professional MIG welding torch "AK-15" / hose package 3 meters.
1 x Ground cable 3 meters
2 x wire guide rolls 0.8 mm & 1.0 mm with 'V' profile (is already installed in the unit)
2 x wire guide rolls 0.6 mm & 0.8 mm with 'V' profile
2 x wire guide rolls 1.0 mm & 1.2 mm with 'U' profile (for aluminum wire)
1 x wire brush
1 x gas connection hose with quick coupling 5 meter
1 x power nozzle M6 x 28 - ø 1.0 mm for aluminum
1 x power nozzle M6 x 28 - ø 0,6 mm for steel
1 x contact tip M6 x 28 - ø 0,8 mm for steel
1 x contact tip M6 x 28 - ø 1,0 mm for steel
1 x assembly wrench
1 x protective cover

Contact data

First name

Last name

E-Mail

Phone - optional

Question about item

Your question

Contact data

First name - optional

Last name - optional

E-Mail

Manufacturer information

STAHLWERK Schweissgeräte Deutschland GmbH was founded in 1998 and offers original welding equipment as a manufacturer. We are your professional and reliable welding equipment supplier. Product safety carries the registered trademark STAHLWERK. The company responsible for product safety is STAHLWERK Schweissgeräte GmbH
located in Bornheim
Mainstraße 4
53332
Germany. For questions regarding product safety
please contact us at the electronic address info@stahlwerk-schweissgeraete.de or by phone at +49 228 24331713. The person responsible for product safety is Alexander Hamann.

Others also bought: