STAHLWERK CUT 70 P IGBT full equipment plasma cutter 70 A / pilot ignition

STAHLWERK CUT 70 P IGBT full equipment plasma cutter 70 A / pilot ignition

SKU: 1174
GTIN: 4260294081741
Category: Award-winning products & test winners

The powerful STAHLWERK CUT 70 Pilot IGBT plasma cutter delivers a powerful 70 amps and has a precise high-frequency (HF) pilot ignition for first-class ignition behavior. Depending on the material, the cutting capacity is up to 25 mm (mild steel ST37 up to 25 mm, V2A or V4A up to 18 mm, aluminum up to 16 mm). The plasma cutter is suitable for all common conductive metals as well as painted sheet metal and rust film. The cutting current can be continuously adjusted from 20 to 70 amps. The compact device has smart cooling and overheating protection and is easy to transport at just 11.4 kg. The STAHLWERK CUT 70 Pilot IGBT plasma cutter is supplied with a comprehensive accessories package.

519,99 €

incl. 19% VAT , plus

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

You can purchase a maximum of Units 3 of this item.

Device functions & components

Plasma / CUT - A plasma jet is generated by means of electricity, which melts the material, which is then removed with compressed air. This allows effortless precise cutting of all conductive metals such as standard steel, stainless steel, copper, aluminum, titanium and many more.
Cutting thickness - cut-offs are possible up to 25 mm depending on the material. Mild steel ST37 up to 25 mm, V2A or V4A up to 18 mm, aluminum up to 16 mm.
Pilot ignition - High frequency (HF) pilot ignition for first-class ignition behavior. No contact with the workpiece necessary! The pilot flame establishes the arc. This torch can be operated with a spacer, which is included in the delivery.
Cutting current - Stepless adjustment from 20 to 70 A.
Air after-run - After cutting is complete, air automatically flows to cool the torch and reduce nozzle and electrode wear.

Device features & advantages

IGBT Technology - Latest and most advanced transistor technology enables high performance welding! No transformer, no MOSFET, state-of-the-art IGBT!
Lightweight & Compact Design - Weighing only 11.4 kg and measuring 460 x 230 x 365 mm, the unit is ideal for cutting work anywhere. Innovative IGBT transistors save space and weight compared to old MOSFET technology. No more heavy carrying!
Highest efficiency & power - Three-phase AC power (400 V) supplies the unit and allows output power of real 70 amps.
Smart Cooling & Overheat Protection - State-of-the-art technology, built-in overheat protection and high-performance cooling allow maximum power to be retrieved.

Note for our United Kingdom customers:
Please note that import duties and United Kingdom Import VAT apply to goods valued at GBP 135 or more. Customs will only release the delivery once the customs duties have been paid. Therefore, please note the delivery status by checking the tracking number.

Technische Daten

Output current	20-70 A
Protection class	IP21S
Mains voltage	400 V AC (+- 15%) / 3 Ph
Mains frequency	50/60 Hz
Maximum mains current (_I1max)	13,8 A
Maximum effective mains current (_I1eff)	5,3 A
Weight	11.4 kg
Dimensions L x W x H (mm)	460 x 230 x 365
Mains connection	CEE16 plug
Air pressure	4 - 6 bar
Air flow rate	min. 140 L / min
Standards	IEC 60974-1; EN 60974-10 (Class A)
WEEE reg. no. DE	85577200

Lieferumfang

1 x STAHLWERK plasma cutter CUT 70 P
1 x Professional plasma hose package P-80, 3 meters
1 x 3-piece plasma accessory set (this is already pre-assembled on the plasma torch):
- 1 x plasma nozzle
- 1 x plasma electrode
- 1 x ceramic cap
1 x 3 meter ground cable
1 x spacer with guide carriage
1 x water separator with pressure gauge and snap-on quick-release couplings
1 x Connecting hose with snap-on quick-release couplings from the appliance to the water separator, incl. 6-piece connection set
1 x Air connection hose with Snap-on quick coupling 5m
1 x Teflon tape
1 x protective cover
1 x P-80 25-piece wear parts set (10 plasma nozzles, 10 plasma electrodes, 5 ceramic caps)
1 x Fully automatic welding helmet ST-450R

High-quality professional P-80 plasma hose package with integrated button protection. Optimal cutting and ignition behavior up to 120 A. Thicker hose and more robust wear parts than PT-31 & AG-60.

Robust grounding clamp with modern 9 mm connection and a strong cable cross-section. Best conductivity through high quality copper cables.

Quick connection of the air hoses thanks to 3/8" snap-on quick coupling on the device and water separator. One handgrip is enough.

In stock

3 × magnetic angle welding angle 11.3 + 22.6 + 34 kg / 25 + 50 + 75 lbs

20,69 € *

Top

299,99 € *

In stock

STAHLWERK P-80 plasma accessories set 25 pieces, wear parts, plasma nozzles + electrodes + ceramic caps for P-80 CUT plasma cutter torch

46,39 € *

In stock

STAHLWERK P-80 plasma accessories set 50 pieces, wear parts, plasma nozzles + electrodes + ceramic caps for P-80 CUT plasma cutter torch

82,49 € *

In stock

STAHLWERK Plasma cutting torch P-80 120 A hose package 5 meters plasma cutter with pilot ignition

94,99 € *

In stock

STAHLWERK fully automatic welding helmet ST-450 R black matt fully automatic dimming, adjustable parameters, incl. 5 spare lenses

29,99 € *

Coming soon

STAHLWERK Plasma cutting torch P-80 / hose package 8 meters up to 120 amps / plasma cutter with pilot ignition

133,99 € *

Coming soon

STAHLWERK Welding torch holder with magnetic base, universal torch holder for TIG, MIG and plasma, white.

16,99 € *

Contact data

First name

Last name

E-Mail

Phone - optional

Question about item

Your question

Manufacturer information

STAHLWERK Schweissgeräte Deutschland GmbH was founded in 1998 and offers original welding equipment as a manufacturer. We are your professional and reliable welding equipment supplier. Product safety carries the registered trademark STAHLWERK. The company responsible for product safety is STAHLWERK Schweissgeräte GmbH
located in Bornheim
Mainstraße 4
53332
Germany. For questions regarding product safety
please contact us at the electronic address info@stahlwerk-schweissgeraete.de or by phone at +49 228 24331713. The person responsible for product safety is Alexander Hamann.

Matching accessories for this device